Telecom
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Interface | Number of Circuits | Voltage - Supply | Current - Supply | Power (Watts) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PEB4164TV1.1GDMUSLIC MULTICHANNEL SLIC |
5,600 |
|
|
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
PSB2186FV1.1GDISAC-S TE ISDN ACCESS CONTROLLER |
32,300 |
|
|
ISDN™ | 64-LQFP | Bulk | Active | ISDN | 4-Wire, IOM-2 | 1 | 4.75V ~ 5.25V | 17mA | - | 0°C ~ 70°C | - | - | Surface Mount | P-TQFP-64-1 |
|
PSB7531ZDWRTELECOMS IC |
2,000 |
|
|
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
PSB7531ZDWLANTIQ PSB7531 TELECOMS IC |
600 |
|
|
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
HC4P5524-9EIA/ITU 24V PABX SLIC |
2,786 |
|
|
- | 44-LCC (J-Lead) | Bulk | Active | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | -20V ~ -28V, 4.75V ~ 5.25V | - | 60 mW | -40°C ~ 85°C | - | - | Surface Mount | 44-PLCC (16.58x16.58) |
|
PEB8091FGDV1.1NETWORK TERMINATION CONTROLLER |
3,800 |
|
|
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
PEB8091FDV1.1NETWORK TERMINATION CONTROLLER |
960 |
|
|
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
HC55185DIMSLIC, 2-4 CONVERSION, BIPOLAR |
554 |
|
|
RSLIC18 | 28-LCC (J-Lead) | Bag | Obsolete | Subscriber Line Interface Concept (SLIC) | - | 1 | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
BCM88312BB1KF12LGDUAL CORE |
530 |
|
|
- | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - |
|
PSB3186FISDN CONTROLLER, 1-FUNC, CMOS, P |
1,428 |
|
|
ISAC™ | 64-LQFP | Bulk | Active | ISDN | IOM-2 | 1 | 3.135V ~ 3.465V | 30mA | - | 0°C ~ 70°C | - | - | Surface Mount | P-TQFP-64-1 |
|
DJLXP730LE.A1LXP730 - MULTI-RATE DSL FRAMER |
1,370 |
|
|
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
MV1442/IG/MPESENCODER/DECODER/CLOCK REGENERATR |
1,195 |
|
|
MV1442 | - | Bulk | Obsolete | Encoder/Decoder/Clock Regenerator | - | - | 5V | 15mA | - | -40°C ~ 85°C | - | - | Surface Mount | 18-SOP |
|
CS61574A-IP1CS61574 - T1/E1 LINE INTERFACE |
707 |
|
|
- | 28-DIP (0.600", 15.24mm) | Bulk | Active | Line Interface Unit (LIU) | E1, T1 | 1 | 4.75V ~ 5.25V | - | 350 mW | -40°C ~ 85°C | - | - | Through Hole | 28-PDIP |
|
PSB7100ZDW-A2XWAY HIGH-END SINGLE-CHIP ADSL2/ |
43,155 |
|
|
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
DS2172T+TRBIT ERROR RATE TESTER (BERT) |
17,000 |
|
|
- | 32-TQFP | Bulk | Active | Bit Error Rate Tester (BERT) | Parallel | 1 | 4.5V ~ 5.5V | 10mA | - | 0°C ~ 70°C | - | - | Surface Mount | 32-TQFP (7x7) |
|
DS2172T+IC TELECOM INTERFACE 32TQFP |
0 |
|
|
- | 32-TQFP | Tray | Obsolete | Bit Error Rate Tester (BERT) | T1 | 1 | 4.5V ~ 5.5V | 10mA | - | 0°C ~ 70°C | - | - | Surface Mount | 32-TQFP (7x7) |
|
HC3-5504DLC-9EIA/ITU PABX SLIC |
290 |
|
|
- | 24-DIP (0.300", 7.62mm) | Bulk | Active | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | -42V ~ -58V, 4.75V ~ 5.25V, 10.8V ~ 13.2V | - | 550 mW | -40°C ~ 85°C | - | - | Through Hole | 24-PDIP |
|
DS2172TIC TELECOM INTERFACE 32TQFP |
0 |
|
|
- | 32-TQFP | Tray | Obsolete | Bit Error Rate Tester (BERT) | T1 | 1 | 4.5V ~ 5.5V | 10mA | - | 0°C ~ 70°C | - | - | Surface Mount | 32-TQFP (7x7) |
|
PEB4365-1T-SV1.2TSLIC-E TWIN SUBSCRIBER LINE INT |
34,640 |
|
|
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
DS2172T/T&RIC TELECOM INTERFACE 32TQFP |
0 |
|
|
- | 32-TQFP | Tape & Reel (TR) | Obsolete | Bit Error Rate Tester (BERT) | T1 | 1 | 4.5V ~ 5.5V | 10mA | - | 0°C ~ 70°C | - | - | Surface Mount | 32-TQFP (7x7) |
Category Overview
Telecom Products & Selection Guide
Telecom are widely used in industrial automation, automotive electronics, communication equipment, consumer electronics, new energy systems, and many other electronic applications. We offer products from multiple manufacturers, packages, and specifications to help engineers and buyers compare and source suitable components.
Use the manufacturer, key specification, availability, and Datasheet filters to narrow down the right Telecom. If the exact part is not listed, submit an inquiry and our team can help check stock, lead time, and suitable alternatives.
FAQ
How do I choose the right Telecom?
Start with the required electrical specifications, package, operating temperature, application conditions, and manufacturer preference, then compare availability and lead time.
Can I order based on the stock shown on this page?
Inventory can change with supply conditions. For project or volume requirements, please submit an inquiry so current stock, pricing, and lead time can be confirmed.
What if the exact part number I need is not listed?
Send us the part number and required quantity. We can help source hard-to-find parts and suggest suitable alternatives based on key specifications.
Do you provide Datasheets and technical documents?
Yes. Use the Datasheet links in the product list to view available technical documents. If a document is unavailable, contact us and we can help check it.
